v0.5.6

**Render with Blender, an AI tab, and the community's contributions.**
IngeTrazo renders photorealistic images with the Blender you already have
installed, by day or by night with your own lights, and can render the view
by itself every time you stop moving through the model. The AI assistant and
the MCP bridge now live in a sidebar tab, and Window ▸ Panels hides the tabs
you don't use. From the community: command search (F3), Extension API 2, STL
import, Paste in Place and Zoom Selection. Plus a batch of fixed reports,
including the protractor that did not give the typed angle in millimetres or
inches.

### Added
- **Render with Blender** (#181), a tab in the sidebar:
  - Uses the Blender installed on the system (EEVEE or Cycles); if it is not
    found, explains how to install it for each package (Windows, Mac,
    AppImage, Flatpak).
  - **Ambience**: day (the sun of the Shadows panel, with its strength),
    night or overcast.
  - **Point lights and spots** placed with a click on the model, with colour
    temperature (Kelvin), power, cone and direction; they are saved in the
    document and undone with Ctrl+Z.
  - **Render finishes** for each material (glass, water, metal, glossy…),
    from the right-click menu on the swatch; «Automatic» guesses from the
    name.
  - Figures that face the camera (Sumari, image trees) come out facing it
    and cut out.
  - The image opens in its own window, with zoom, Save and Open folder.
  - **Sync with the view**: with Blender kept open in the background, a
    draft of what you see appears within a second or two every time the
    camera stops; editing the model reloads the scene.
- **AI tab**: the AI assistant and the MCP bridge in the sidebar. The prompt
  takes several lines (Enter sends, Shift+Enter breaks a line); Ctrl+Shift+A
  brings the tab forward even when it is hidden.
- **Window ▸ Panels**: every sidebar tab, extension tabs included, to hide or
  show; the same list with a right-click on the tabs. Hidden tabs stay hidden
  after a restart.
- **Command search (F3)**, like Blender's F3 or Rhino's command line: type a
  few letters and Enter runs the command. It finds any action of the window
  (menus, tools, panels, extensions) in the menu language or in English, by
  its menu path, by initials («rf» → Reverse Faces) and despite a typo
  («orinet»), ignoring accents and case. Each result is a single row, as in
  Blender (faded path ▸ icon and name, shortcut on the right); the box opens
  under the mouse, inside the modelling area and without covering the side
  or top bars, with ten rows in view; right-click ▸ Change shortcut… opens
  Preferences on it, and a letter typed in an open menu searches only that
  menu. Hovering a result shows, as in Blender, its name, what it does and
  its keys. Also in Help ▸ Search commands… and in the sheet composer, with
  its own commands (#168, @canalsecuario-blip). The status bar mentions it
  when the program opens.
- **The composer's tools have short names** («Chain dimension»); the long
  explanation stays in the tooltip.
- **STL import** (binary and ASCII) with the model's unit and flat faces
  merged, read in the background; and **Edit ▸ Simplify Mesh** (#161,
  @kagehak).
- **Extension API 2**: several named panels per extension that come back
  where they were left, drawing over the viewport with `world_to_pixels`,
  file types of their own and workspaces (#141, @felixriestra). Several
  extensions can also share one tab and add entries to the Extensions menu;
  the guide explains where each kind of interface belongs.
- **Paste in Place** (Ctrl+Alt+V), into any group (#188), and **Zoom
  Selection** (#193) (@canalsecuario-blip).
- **Delete erases the edge or face under the cursor** without selecting it;
  Backspace erases only the selection (#98, @canalsecuario-blip).
- **DWG import on Windows, macOS and the Flatpak**: the LibreDWG converter
  ships in every package (#101, #180).
- **Italian translation** (#182, @deedend) and Brazilian Portuguese brought
  up to date (#186, @dafrobozao).
- In Help ▸ About, the credits stop under the mouse and scroll with the
  wheel.

### Fixed
- **A typed angle, scale factor or number of sides was scaled by the
  document's unit**: in millimetres, «45» in Rotate turned 0.045° (#176,
  reported by Esteban Penzo).
- **An edge copied with Move across a face did not split it** (#177,
  reported by Lefteris Schetakis).
- **Ctrl+Z in the middle of a line** steps the chain back to the previous
  vertex instead of continuing from a point that no longer exists (#175,
  @pacaeiro).
- **The Tape Measure switched mode on Ctrl+Z**: now only a tap of Ctrl does
  (#183); it no longer makes zero-length guides nor clips its preview (#173,
  #174, @pacaeiro).
- **Panning was very slow at the closest zoom**: it now follows the depth of
  what is under the cursor (#184).
- **Non-finite values** (a huge number in the value box) no longer stall the
  tools nor get saved into the document (#185, first part). Reported by
  Alejandro Limón.
- **The composer's chain dimension** kept ending after each segment (#187,
  @tonfdd).
- **The toolbar shows the configured shortcut**, not the factory one (#171,
  @pacaeiro).
- **Rectangle**: the square inference locks (#169, #170, @pacaeiro).
- **The Push/Pull cursor disappeared on Windows** after using it (#191).
- **The AI assistant on Mac could not connect**
  (`CERTIFICATE_VERIFY_FAILED`): it uses the system's certificates, with
  verification kept on (#198, diagnosed by @troya2).
- The unsaved-changes dialog and Qt's standard buttons follow the program's
  language (#154, @canalsecuario-blip).

### Antivirus
- The Windows installer is built with a PyInstaller bootloader compiled by
  us, which reduces Windows Defender false positives (#162). Code signing
  (SignPath) is in progress.

### Tested before release
`scripts/release_check.sh v0.5.5` on `plaza.igz`
(`benchmarks/results/0.5.6.json`): viewport unchanged (paint 9.63 → 9.99 ms,
orbit 10.31 → 9.69 ms), opening the plaza 4.74 → 4.72 s, startup 0.82 →
0.91 s (the new tabs), no leaked objects over six reopenings; fast suite 3444
and slow suite 804 passed.

### Community contributions
* Fix Tape Measure guides and preview clipping by @pacaeiro in https://github.com/ingelibre/ingetrazo/pull/174
* Lock Rectangle square inference with Shift and Arrow Down by @pacaeiro in https://github.com/ingelibre/ingetrazo/pull/170
* Dialogs: standard buttons follow the app language by @canalsecuario-blip in https://github.com/ingelibre/ingetrazo/pull/154
* Delete erases the hovered edge or face, no click needed by @canalsecuario-blip in https://github.com/ingelibre/ingetrazo/pull/98
* Add Italian UI translation (i18n/it.json) by @deedend in https://github.com/ingelibre/ingetrazo/pull/182
* Brazilian Portuguese translation update by @dafrobozao in https://github.com/ingelibre/ingetrazo/pull/186
* Zoom Selection: frame the selection like Zoom Extents frames the model by @canalsecuario-blip in https://github.com/ingelibre/ingetrazo/pull/193
* Edit ▸ Paste in Place (Ctrl+Alt+V): paste where the copy was taken, in any group by @canalsecuario-blip in https://github.com/ingelibre/ingetrazo/pull/188
* Command search (F3): run any command by name, as in Blender by @canalsecuario-blip in https://github.com/ingelibre/ingetrazo/pull/168
* credits: update my own entry by @canalsecuario-blip in https://github.com/ingelibre/ingetrazo/pull/196
* Extension API 2: named panels, overlay projection, own file types, workspaces by @felixriestra in https://github.com/ingelibre/ingetrazo/pull/141
* Add STL import and mesh simplification by @kagehak in https://github.com/ingelibre/ingetrazo/pull/161

### New contributors
* @deedend made their first contribution in https://github.com/ingelibre/ingetrazo/pull/182
* @kagehak made their first contribution in https://github.com/ingelibre/ingetrazo/pull/161

**Full Changelog**: https://github.com/ingelibre/ingetrazo/compare/v0.5.5...v0.5.6